WarmGlass.com

Lorelei...The kiln looks exactly like a Duncan(no longer made) It was popular with 'china painters' and small low fire ceramics. I got one 2 years ago for $150 in like new condition. I have not pushed the temp. and use it only when the other kilns are busy for lusters,paints,decals etc. I would not ...

Jackie...
Very strong graphic design. Thanks for showing your work. What are the basic sizes ?
jim

Rob...The RA Morey Design page is good...but the Home page comes up with a white background. The same as a few weeks ago. I have an iMac and use Explorer 5.1
jim

Rob...The RA Morey Design page is good...but the Home page comes up with a white background. The same as a few weeks ago. I have an iMac and use Explorer 5.1
jim

Two good blades for an MK saw are MK 215 GL or MK 303 Pro. Both are aprox the same price and both do a good job. Here is a link.
jim

http://www18.iwebcenters.com/protoolsex ... 31251.ctlg

Really nice flow! What is the diameter?
jim

You can get an L&L with zone control for less than the others and it should be an advantage for your glass.
jim

Mika makes a 45º miter bit which will fit any of the common grinders.
http://www.sunshineglass.com has one.
jim

I had the same results as Glenda...Get to your site...nothing to click on except photo montage...get a page with montage banner...nowhere else to go. I also have a Mac...anyone with a Mac able to get through?

I have some of the kevlar gloves as well as the sleeves from CDV. I bought them 2 or 3 years ago. I use them for glory hole work. The gloves do a good job with the heat from a full size glory hole.They fit well and there is no problem with dexterity. I would highly recommend the sleeves be used with...

I have never had to heat and re-pin(maybe dumb luck) If you do heat... do not forget to uplug the kiln before work. I re-pin pushing in at an angle so that there more fresh brick to hold the pin and gravity will be countered to some degree...good luck
jim

Profusion makes dichroic pattern glass as well as the same patterns in decal...very helpful and will send you a cat.
jim

http://www.dichroicpatterns.com/

I would check with Phil about how to best vent your new kiln..he would know if the Orton hood or floor vent model would work best. I have floor vents on 2 kilns and do not use them because they affect the heat distribution and are not predictable...and the room ventalation is ok
jim

Distortion because of slumping may be a problem only if it is a steep slump...otherwise should be ok...be sure to vent the kiln (I vent to 1050 when using gold) The slump temp will be ok for the gold. good luck!
jim

Also...shake the small bottle often...the metal settles quickly.
If you use a brush for application..save it and use it for the gold ONLY. You do not want cross contamination. Normal painters turp can also be used to clean tool and/or brush.