WarmGlass.com

Wow, the pool is just too cool. The first thing I thought was I want to touch it.
Sharon

To find your tax base just take the total sale and divide by 1.x , x being your salestax rate. Example: Sold for $50.00, divide by 1.07 assuming your tax rate is 7%. That gives you a base price of $46.73 sales tax of $3.27 total $50.00.
Sharon

Nancy, try this link http://www.clayartcenter.com/synairproducts_1.htm . I bought some mold making stuff from them but haven't tried it yet.
Sharon

Hi Marty,
I did search the archive using pitting as a search term. Found post about pitting with ird and kiln shelves, but nothing regarding steel molds. I assume you are telling me it's my mold that caused the pitting.
Sharon

I just slumped my first project. I used Spectrum 96 transparent blue and some clear. I fused 2 layers first and then slumped into an old miners pan which I first sandblasted and drilled holes into and then heated and sprayed kiln wash onto. I fused to 1225 F for 5 minutes. All around the edges and d...

Paint rubber cement over the marks.

Sharon

I have a Skutt 1018 side firing ceramic kiln that I am using for glass. My Skutt book says to always leave the top peep hole unplugged. I read in one of the posts to plug all holes to avoid drafts, so my question is can I plug all the holes and not hurt my kiln? Does the leaving one unplugged only a...

Where would one buy talc?

Thanks,
Sharon

It's beautiful. I really like the pattern.
Sharon

Sorry everyone I just posted that reply to the wrong thread.
Sharon

Posted to wrong thread.

Thanks for the replies. The schedule I used for this pot melt was
650dph to 1650 hold 80 min Then off while I reached in with tongs and removed the pot, not fun I might add, then back up to 1450 hold for 20 min. AFAP to 965 hold 30 min. then 250 dph to 750, off and cool to room temp.
Sharon

I have been reading this forum for a while now but have never posted until now. I am experimenting with pot melts and have a question. I have done three melts so far all with transparent glass, two with Bullseye and one with Spectrum. Can someone tell me why the transparent glass is no longer transp...