I am trying to do a panel, and I want to glue some pieces of mirror behind a glass layer.
I tried silicon and UV glue, but both appear from the glass side. It seems that it´s a wet spot.
There is any way to do this?
Thanks
Luiza
if the panel is going to be in a frame of some sort, maybe you could adhere the mirror to the front piece of glass by using silicone just along the extreme outside edges which will be covered by the frame.
I don't know how large an area you are trying to cover. Smaller the better. Both will work, but the UV will be a much better clean-up, and shorter set-up time. Depends on the color glass you are trying to adhere. If not red, yellow, green, orange or some ambers...the UV would probably be best. - Barbara
Do be careful not to get the UV glue on the edges of your mirror. It will eat the silvering. Actually silicone will eat silvering also unless it is a "neutral cure" silicone.