Cold working tools in Canada
Moderators: Brad Walker, Tony Smith
-
- Posts: 16
- Joined: Mon Mar 31, 2003 12:57 am
- Location: Nottawa, Ontario, Canada
- Contact:
Cold working tools in Canada
I've been studying all the posts on cold working tools -- now want to buy some, but know I'll have big shipping and duty charges if I order from US web sites. Does anyone know of good suppliers in Canada? Lapidary suppliers around Toronto don't have 12" machines.
TurtleCreek Art Glass in Nottawa, Ontario
-
- Posts: 19
- Joined: Mon Mar 10, 2003 11:57 am
- Location: Calgary
- Contact:
-
- Posts: 16
- Joined: Mon Mar 31, 2003 12:57 am
- Location: Nottawa, Ontario, Canada
- Contact:
I was thinking of buying a disk grinder -- perhaps the 12" Crystalmaster Pro with diamond grinding disk and polishing pads. Maybe there is something else I should buy. Mostly I'm doing bowls and plates that have been combed ... and I find the surfaces and edges need some extra finishing. If you could direct me to a Canadian supplier I'd be very grateful.
TurtleCreek Art Glass in Nottawa, Ontario
-
- Posts: 19
- Joined: Mon Mar 10, 2003 11:57 am
- Location: Calgary
- Contact:
OK well maybe not everything.
I don't know of anyone who is fabricating lap wheels. Almost everybody out west here has built their own. I'm not advocating design theft by any means but if you have time,find a local machine shop and ask them how much. Go simple, trued 12" platform, belt drive motor at appropriate RPM, tray, stand. If there's a language barrier, draw or show them a picture!!! A machine like this will outlast you and the pads will earn their keep in the first year in terms of time saved alone. Wet belt sanders, sandblasting etc you should be able to find in the archives and they'll be available in or around Toronto.
If you just want to buy and get on with it, there should be no duty(no CDN manufacturers), shipping, exchange and taxes are facts of life. You'll never regret doing it if you are making a lot of work or plan to.
I don't know of anyone who is fabricating lap wheels. Almost everybody out west here has built their own. I'm not advocating design theft by any means but if you have time,find a local machine shop and ask them how much. Go simple, trued 12" platform, belt drive motor at appropriate RPM, tray, stand. If there's a language barrier, draw or show them a picture!!! A machine like this will outlast you and the pads will earn their keep in the first year in terms of time saved alone. Wet belt sanders, sandblasting etc you should be able to find in the archives and they'll be available in or around Toronto.
If you just want to buy and get on with it, there should be no duty(no CDN manufacturers), shipping, exchange and taxes are facts of life. You'll never regret doing it if you are making a lot of work or plan to.
-
- Posts: 55
- Joined: Wed Mar 12, 2003 11:40 am
- Location: Texas, USA
You can download lap plans from http://www.hisglassworks.com by going to "Downloads" on the "Support" menu.
-
- Posts: 16
- Joined: Mon Mar 31, 2003 12:57 am
- Location: Nottawa, Ontario, Canada
- Contact:
Thanks for these replies. I had considered having my husband make a machine, but that will take a long time. I was looking for a faster, easier solution -- and some recourse if it didn't work. Complaining to my husband isn't always the best solution. However, it looks like I should sweeten him up and start building a relationship with a machine shop.
Where do Canadians buy their disks and cerium oxide -- order from HIS or is there there a supplier here?
Where do Canadians buy their disks and cerium oxide -- order from HIS or is there there a supplier here?
TurtleCreek Art Glass in Nottawa, Ontario
-
- Posts: 16
- Joined: Mon Mar 31, 2003 12:57 am
- Location: Nottawa, Ontario, Canada
- Contact:
Thanks -- I know my website is down -- just when I want to do some promotion of fall shows. The system operator who manages the host site is off in Europe on his honeymoon so I'm stuck until he gets back. I'd scream at him ... but he is my son and his prices are great!
TurtleCreek Art Glass in Nottawa, Ontario
Ah, nepotism! Try and keep it in the family. BrockEleanor Brownridge wrote:Thanks -- I know my website is down -- just when I want to do some promotion of fall shows. The system operator who manages the host site is off in Europe on his honeymoon so I'm stuck until he gets back. I'd scream at him ... but he is my son and his prices are great!
My memory is so good, I can't remember the last time I forgot something . . .
-
- Posts: 19
- Joined: Mon Mar 10, 2003 11:57 am
- Location: Calgary
- Contact:
Disks definitely from HIS, cerium you should be able to source from someone close. We usually hit up a place here that does a lot of bevelling of plate glass. They go through a lot of cerium and have no problem selling off 5 or 10 lbs whenever we ask. That much goes a long way with the synthetic felt polishing pad we got from HIS.
well i know where to get some used diamond disk if you are interested. on the wheel give me a call at the Living arts center and i might be able to find you a used one or give you plans on making one out of a potters wheel (yes it can be done cheap and fast) also i wonder if a belt sander might not be better for you if you are doing edge work.
terry craig
905 306 6062
terry craig
905 306 6062
-
- Posts: 186
- Joined: Fri Mar 14, 2003 2:05 am
- Location: Surrey B.C. Canada
- Contact:
-
- Posts: 468
- Joined: Sun Mar 09, 2003 3:20 pm
- Location: Columbus, Ohio USA
For wet belt sanders, the BEE is the best thing going. Made in Canada.phil wrote:Please continue thread of Canadian Suppliers - I'm also looking for cerium, possibly used (or new) wet belt sander, good mold sources (have already down all the GTA ceramic shops)etc, etc. Any help much appreciated - Terry, do you have a retail shop with supplies by chance - I'm in Mississauga.
http://www.esourcecanada.com/profile.as ... d=19533406
For a picture of the BEE sander try
http://www.crlaurence.com/ProductPages/ ... 85&Origin=
Ron
-
- Posts: 16
- Joined: Mon Mar 31, 2003 12:57 am
- Location: Nottawa, Ontario, Canada
- Contact:
Phil,
I had a great meeting with Terry yesterday and he showed me their equipment and gave me lots of ideas for making my own. He also directed me to BEE and I called them this morning. Their price for the large wet belt sander that Living Arts Centre has is $1698. It's probably too big a machine for my space so I'm continuing research.
Just spoke with Chandler Industrial Supplies in Mississauga. They are preparing quotes on a small tabletop machine, belts etc. that I should have later today. I'll share my research when I get it.
Other opportunities -- rent time in grinding studio at Living Arts Centre -- I'll be checking into price.
-- adapt dry sander so water can't get into motor area -- looked at RYOBI model BD4600 at Home Depot -- has 4" x 36" belt that can be set vertically -- also 6" disc.
Let me know what you find about good mold sources.
I had a great meeting with Terry yesterday and he showed me their equipment and gave me lots of ideas for making my own. He also directed me to BEE and I called them this morning. Their price for the large wet belt sander that Living Arts Centre has is $1698. It's probably too big a machine for my space so I'm continuing research.
Just spoke with Chandler Industrial Supplies in Mississauga. They are preparing quotes on a small tabletop machine, belts etc. that I should have later today. I'll share my research when I get it.
Other opportunities -- rent time in grinding studio at Living Arts Centre -- I'll be checking into price.
-- adapt dry sander so water can't get into motor area -- looked at RYOBI model BD4600 at Home Depot -- has 4" x 36" belt that can be set vertically -- also 6" disc.
Let me know what you find about good mold sources.
TurtleCreek Art Glass in Nottawa, Ontario
-
- Posts: 16
- Joined: Mon Mar 31, 2003 12:57 am
- Location: Nottawa, Ontario, Canada
- Contact:
-
- Posts: 18
- Joined: Thu Mar 13, 2003 11:17 pm
- Location: Newport, Oregon
I'd be interested in the plans for making one out of a potter's wheel. Thanks, Lynn BishopTerry Craig wrote:well i know where to get some used diamond disk if you are interested. on the wheel give me a call at the Living arts center and i might be able to find you a used one or give you plans on making one out of a potters wheel (yes it can be done cheap and fast) also i wonder if a belt sander might not be better for you if you are doing edge work.
terry craig
905 306 6062