Glue Experiment Again

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
Tony Serviente
Posts: 328
Joined: Thu May 29, 2003 11:48 am
Location: Ithaca,NY
Contact:

Glue Experiment Again

Post by Tony Serviente »

Another try
Image
Here is result of a quick test I did over the weekend. Used big enough blanks to make sure there was possibility of burnoff entrapment, as I wanted to see which was cleanest. Results surprised me. No difference between Elmers full, cut, and Aileens. Scotch tape was pretty good too, only slight remnant, very faintly hazy. Modeling clay was fun, its even better in person. Stayed away from the thin stuff like Fusers glue and Aqua Net, as they aren't useful for the work I do most of the time. I have to do some more runs in the next week. If anyone has suggestions for fusing adhesives to test, let me know.[/img]
Tony Serviente
Posts: 328
Joined: Thu May 29, 2003 11:48 am
Location: Ithaca,NY
Contact:

Last try(today) at image posting. Please be patient.

Post by Tony Serviente »

Here is result of a quick test I did over the weekend. Used big enough blanks to make sure there was possibility of burnoff entrapment, as I wanted to see which was cleanest. Results surprised me. No difference between Elmers full, cut, and Aileens. Scotch tape was pretty good too, only slight remnant, very faintly hazy. Modeling clay was fun, its even better in person. Stayed away from the thin stuff like Fusers glue and Aqua Net, as they aren't useful for the work I do most of the time. I have to do some more runs in the next week. If anyone has suggestions for fusing adhesives to test, let me know.

Image
Post Reply