Switch from 1/8" fp to 1/16" fp and it will work well.
Jim
kilncarving
Moderators: Brad Walker, Tony Smith
-
- Posts: 309
- Joined: Sun Mar 09, 2003 7:09 pm
- Location: Sun City West (NW Phoenix), AZ
- Contact:
Re: kilncarving
"With or without religion, good people can behave well and bad people can do evil; but for good people to do evil—that takes religion. " Steven Weinberg
-
- Posts: 730
- Joined: Mon Mar 10, 2003 2:22 pm
- Location: wanchese north carolina
- Contact:
Re: kilncarving
the glue has outgassed well before the glass moves . rosannaLinda Steider wrote:I teach kilncarving in my basic class & let the students go 3 to 5 layers high with fiber paper, using 2 layers of 3mm. We don't prefire to fuse first, just design, cut & stack the fp, place glass atop & fire. As Rosanna said, the firing schedule would be helpful, but without it I'd guess firing too fast; &/or could there have been too much glue under that high point that may have caused excess air?
Linda
artist, owner of wanchese art studio, marine finisher