Jen Ken Kiln digital thermometer

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
bcraus
Posts: 1
Joined: Wed Dec 31, 2003 8:18 pm

Jen Ken Kiln digital thermometer

Post by bcraus »

I have a question, I've got my Jen Ken kiln, and it has the digital thermometer, and I don't know how to program it, can someone please help me?, or point me in the right direction.

Becca
Brad Walker
Site Admin
Posts: 1524
Joined: Fri Mar 07, 2003 9:33 pm
Location: North Carolina, USA
Contact:

Post by Brad Walker »

Are you referring to a controller or to something else? If it's a controller, let us know your model of kiln and what the controller looks like and we can probably help. Perhaps you can find your particular controller here: http://www.aaproducts.com/../Controller.html
dee
Posts: 302
Joined: Tue Mar 11, 2003 5:20 pm
Location: Atlanta GA
Contact:

Re: Jen Ken Kiln digital thermometer

Post by dee »

bcraus wrote:I have a question, I've got my Jen Ken kiln, and it has the digital thermometer, and I don't know how to program it, can someone please help me?, or point me in the right direction.

Becca
if it's a digital controller, centre de verre has alot of kiln controller manuals online along with the various kilns and they carry the jen ken line - click on the link at the top of the page to visit their site....
happy new year
btw, randy and mike usually include a manual for the controller and kiln - are you sure you didn't get one?
D
Dee Janssen
Unicorn's Creations Studio
http://ucjewelry.com
dee@ucjewelry.com
rodney
Posts: 167
Joined: Mon Mar 10, 2003 12:05 pm
Location: new mexico
Contact:

Post by rodney »

if you bought it directly from gen ken, or even if you got it used, id say, just call em up, they have always been very helpful with all my questions, these people are first rate,,,good luck,,rodney
Post Reply