Bubbles Problems in Fusion

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
Guy_o
Posts: 1
Joined: Thu Feb 12, 2004 4:42 pm
Location: Chicoutimi, Quebec

Bubbles Problems in Fusion

Post by Guy_o »

I tried to fuse 3 pieces of float glass 24x24 inch wide and 1/4 inch thick without any bubbles.
I did many test but the result is not perfect.

So, if anybody can help me I would apreciate.

Thanks
Guyo
Top
Mark Hughes
Posts: 49
Joined: Mon Mar 17, 2003 6:27 pm
Location: Omaha, Nebraska

Post by Mark Hughes »

You could try ramping at 50 deg/hr between 1020 and 1350. There is a lot on this in the archives. try key words "bubble squeeze".
Mark Hughes
Top
Post Reply

Return to “Techniques and Tools”