slumping a sink
Moderators: Brad Walker, Tony Smith
slumping a sink
Okay, I'm trying to slump an oval sink. Nothing too big. It measures 13" x 9.5" x 5" and 3/8" thick. First, time I fired to 1250 got a good slump going but not quite to the shape of the mold I was firing it into. Second time around I fired to 1350 and the glass ended up in a puddle on the bottom of the mold. Do I need to fire to 1250 and just soak the kiln longer or should I fire to 1300 and just watch the kiln like a hawk?
-
- Posts: 475
- Joined: Sun Mar 09, 2003 5:01 pm
- Location: Arizona
- Contact:
Hey Marty, what about on the way down? Did you ever slow the cooling side of your schedule? By the way - your new work is fantastic! You were supposed to post here when you updated your site with those pictures, remember? Oh, and since I'm bitching anyway, you've had a PM in your box for a month. I was never planning to delete it because I just wanted to see how long it would take you to find, but it's driving me bananas! Just check that darn thing sometimes. And why can't you ever take out the garbage . . . oh! sorry!Marty wrote:Slower- you've got a fair-size chunk of glass to slump, you don't want to risk thermal shock on the way up (or down for that matter).
I've recently had to mend my evil ways and slow down to less than 100dph on the way to 1000.
Gads. These are great... go take a peek:Jackie Beckman wrote:Hey Marty, what about on the way down? Did you ever slow the cooling side of your schedule? By the way - your new work is fantastic! You were supposed to post here when you updated your site with those pictures, remember? Oh, and since I'm bitching anyway, you've had a PM in your box for a month. I was never planning to delete it because I just wanted to see how long it would take you to find, but it's driving me bananas! Just check that darn thing sometimes. And why can't you ever take out the garbage . . . oh! sorry!Marty wrote:Slower- you've got a fair-size chunk of glass to slump, you don't want to risk thermal shock on the way up (or down for that matter).
I've recently had to mend my evil ways and slow down to less than 100dph on the way to 1000.
http://www.kremerglass.com/newdir.htm
Did you make the mold for Ellipsis?
Jackie Beckman wrote:Hey Marty, what about on the way down? Did you ever slow the cooling side of your schedule? By the way - your new work is fantastic! You were supposed to post here when you updated your site with those pictures, remember? Oh, and since I'm bitching anyway, you've had a PM in your box for a month. I was never planning to delete it because I just wanted to see how long it would take you to find, but it's driving me bananas! Just check that darn thing sometimes. And why can't you ever take out the garbage . . . oh! sorry!Marty wrote:Slower- you've got a fair-size chunk of glass to slump, you don't want to risk thermal shock on the way up (or down for that matter).
I've recently had to mend my evil ways and slow down to less than 100dph on the way to 1000.
nag, nag, nag!
I do take out the garbage. And cook, and.... remember, I'm the mom here.
I got the messages- how could one get a pm from another BMD owner and not look?
and yes the way down is sloooooow too. Usually a total of 20 to 28 hours annealing and cooling to rt.
Dani- that mold is a secret (for now), a prime instance of cheatin' technology!
Okay, did the third try with a bit more success, but not completely happy. Fused the three sheets of glass together first for 3/8" thickness-great! Made the mold for slumping into-also great. Took it real slooow to 1250. Okay. Let it soak for 25 minutes, lip starts to curl in. I'm not sure if I'm going to use this or not. I might just cut the lip off. Should I be slumping over the mold instead of into the mold? Any more advice?