sieves for frit

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
George Foster
Posts: 8
Joined: Mon Jan 12, 2004 3:05 pm
Location: Mobile, AL

sieves for frit

Post by George Foster »

Does anyone know of a source for a set of affordable sieves to seperate various sizes of frit? All I see on the web are expensive testing sieves.
Thanks.
rosanna gusler
Posts: 730
Joined: Mon Mar 10, 2003 2:22 pm
Location: wanchese north carolina
Contact:

Post by rosanna gusler »

kids plastic sand sieves. 3 sizes in a set. any tacky beach shop. also thompsons enamel sells alot of different screening materials. rosanna
Phil Hoppes
Posts: 298
Joined: Wed Mar 12, 2003 2:20 pm
Location: Overgaard, AZ

Post by Phil Hoppes »

Colander - course
Smaller mesh colander - fine
frying Pan grease screen - powder

All can be found at Wal Mart, real cheap

Phil
Bert Weiss
Posts: 2339
Joined: Tue Mar 11, 2003 12:06 am
Location: Chatham NH
Contact:

Re: sieves for frit

Post by Bert Weiss »

theface wrote:Does anyone know of a source for a set of affordable sieves to seperate various sizes of frit? All I see on the web are expensive testing sieves.
Thanks.
The good ones that I know about cost $57 each from Bailey pottery Supply. They also sell some for $25 that work well but are not stackable.
Bert

Bert Weiss Art Glass*
http://www.customartglass.com
Furniture Lighting Sculpture Tableware
Architectural Commissions
Stuart Clayman
Posts: 224
Joined: Mon Mar 31, 2003 12:35 pm
Location: Virginia
Contact:

Post by Stuart Clayman »

Kiln Repair by a Clayman kilnrepair@yahoo.com
Glassworks by a Clayman
http://www.GlassArtists.org/GlassworksByAClayman
Stuart Clayman
Posts: 224
Joined: Mon Mar 31, 2003 12:35 pm
Location: Virginia
Contact:

Post by Stuart Clayman »

Kiln Repair by a Clayman kilnrepair@yahoo.com
Glassworks by a Clayman
http://www.GlassArtists.org/GlassworksByAClayman
ellen abbott
Posts: 148
Joined: Tue Mar 11, 2003 12:04 pm
Location: Houston Tx
Contact:

Post by ellen abbott »

I use strainers/sieves I bought at the restaurant supply. One is about a 1/16" mesh (maybe a little larger), one is much finer (maybe half), but the one I use to sift out the powder is a re-usable coffee filter I bought at the grocery store.

E
daffodildeb
Posts: 125
Joined: Mon Jul 28, 2003 3:48 am
Location: Hot Springs Village, AR

Post by daffodildeb »

How about a buck or less? Tom in Texas showed me his, and I've made some too. Just take plastic cups, drill holes with successively larger bits, and you've got just about a freebie set that also stacks. I used 16 oz disposable picnic cups, but anything drillable would work.
Deb
Post Reply