Ceramaguard

This forum is for questions from newcomers to kiln-forming.

Moderator: Tony Smith

Post Reply
Franzeska
Posts: 61
Joined: Tue Jul 24, 2012 10:46 am

Ceramaguard

Post by Franzeska »

Ceramaguard for molds and dams? The Armstrong website has a long list of tiles? Fine fissured, School Zone, Health Zone, Ultima, on and on. Which one?

Thanks.

Franzeska
Barb R
Posts: 58
Joined: Tue Jul 26, 2005 3:02 pm
Location: Ft. Collins, CO

Re: Ceramaguard

Post by Barb R »

Maybe this will help..


http://www.warmtips.com/20050910.htm

Barb
CH Glass
Posts: 14
Joined: Sun Mar 21, 2010 3:43 pm

Re: Ceramaguard

Post by CH Glass »

I've also tried to find Ceramaguard tiles. I've looked at Lowes and Home Depot, and found ceiling tiles made by Armstrong, but they do not specifically say Ceramaguard. I plan to try a commercial builders supply next. Any other suggestions?
Franzeska
Posts: 61
Joined: Tue Jul 24, 2012 10:46 am

Re: Ceramaguard

Post by Franzeska »

Got it. Thanks.
Brad Walker
Site Admin
Posts: 1501
Joined: Fri Mar 07, 2003 9:33 pm
Location: North Carolina, USA
Contact:

Re: Ceramaguard

Post by Brad Walker »

CH Glass wrote:I've also tried to find Ceramaguard tiles. I've looked at Lowes and Home Depot, and found ceiling tiles made by Armstrong, but they do not specifically say Ceramaguard. I plan to try a commercial builders supply next. Any other suggestions?
You can't buy Ceramaguard at Lowes or Home Depot, only a commercial builder's supply place.

They'll generally make you buy a full case of the tile. If you want less than that, we sell it by the square foot at www.warmglass.org
CH Glass
Posts: 14
Joined: Sun Mar 21, 2010 3:43 pm

Re: Ceramaguard

Post by CH Glass »

Thanks, Brad!
Post Reply