Time to purchase small wet belt sander - need your input

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
Stephen Richard
Posts: 302
Joined: Sun Jul 06, 2003 4:36 pm
Location: Glasgow, Scotland
Contact:
Contact Stephen Richard

Re: Time to purchase small wet belt sander - need your input

Post by Stephen Richard »

Covington have informed me that Roger Rivers @ QA Equipment is the distributor in the UK
Steve Richard
You can view my Blog at: http://verrier-glass.blogspot.com/
Top
Buttercup
Posts: 637
Joined: Mon Jan 28, 2008 5:22 pm
Location: S.E. Queensland Australia

Re: Time to purchase small wet belt sander - need your input

Post by Buttercup »

Jerry, when I had a large floor-model belt sander I used oil, sprayed on from an aerosol can, instead of water; much less messy in an enclosed environment. I now have the Covington benchtop model on a rolling cart, with a water dripfeed from a three litre plastic juice container, to the built-in water regulator on the belt sander. Jen
Top
Post Reply

Return to “Techniques and Tools”