New Slump MOLD

[twin vision glass]

phpC36r4oAM.jpg (40.58 KiB) Viewed 23829 times

phpmr89NDAM.jpg (40.47 KiB) Viewed 23829 times

New panel fired in a friends kiln . She is so kind and helpful and generous and makes the ulitmate wheat free meals and brownies. Thank you Katherine Russell and welcome back to Canada after years in Australia.

[twin vision glass]

different panels that go together . AND others in various stages of creation. Lots of frit and 7 layers of glass . I had to drive for 3 hours in snow storm to fire these too!!! so it was a trick to have the whole million pieces NOT slide around. I love lepages white glue. Just a tiny dab on outer edge of each piece holds it all in place. BUT over a few bumps in the road I was definately doing this

phpVeWe3HAM.jpg (35.7 KiB) Viewed 23829 times

phpxOeNrpPM.jpg (37.8 KiB) Viewed 23814 times

phpGP8rkKPM.jpg (24.64 KiB) Viewed 23814 times

[twin vision glass]

phptsIltYPM.jpg (37.9 KiB) Viewed 23782 times

I have used the slump mold again but with a slight different shape as the client only wanted it slumped 4 inchs deep instead of 8 inchs deep. I carved a piece of fiber board and put it in the bottom of the mold with Vent holes and it really slumped nicely. I am very glad the mold is still going strong. This piece is 25 inchs by 19 inchs x 4 inchs deep.

[Sue Hunchuk]

Stunning! What are they using them for, if so shallow?

[orittlandau]

beautiful work Les!
THANK YOU for sharing with us your colourful works using the new slump mold.

[twin vision glass]

Thanks Sue and Orritlandau,
The clients want 3 that will span the length of their lovely large beautiful wood table. (they felt lower was better for them with more flat area due to to the length of each piece.) Now the trick will be to get each one EXACTLY the same slump. I took alot of notes so hopefully the next will follow the same schedule nicely. Les

[Tammy Macdonald]

Stunning, is the right word. Fabulous look.

[twin vision glass]

Sorry for this not great photo but Rick Wilton might appreciate this as he helped me grind it. Thanks again Rick. The base is simple and nice. And thanks Tammy for your kind words. The piece is called "GLACIERS"
Les

phpPMbM2GAM.jpg (31.07 KiB) Viewed 23748 times

phpFc6o4uAM.jpg (25.33 KiB) Viewed 23748 times

phphQV27lPM.jpg (31.18 KiB) Viewed 23743 times

[Rick Wilton]

Looks GREAT Les,

Get some photos of them finished on that amazing table if you can.

Take care.

[twin vision glass]

i will do my best dear friend and polisher extraodinaire!!! Les

[Warren Weiss]

Hi Les,
Beautiful! Is the metal bar on top of the glass to hold it to the base, or is it through the glass creating sections? Thanks.
Warren

[twin vision glass]

Through the glass ,making 2 sections that sit on two long full length metal square lengths that span the whole piece. (which is really nice for transport tooo!) as the piece comes apart and is smaller for shipment. Les

[twin vision glass]

php7Z2CgMPM.jpg (27.9 KiB) Viewed 23652 times

phpSHKUHaPM.jpg (39.96 KiB) Viewed 23652 times

Hi!!! I had a request to show how the stand was made for the 2 panel piece. AND here is another of a 3 part series of vessels . Goodness I pray for power and enough of this 29 Below C. weather we are having even though it is bright and sunny BUT definately freezes the eyelashs and spoils one make up .

[Havi]

Les,
I just saw this.
I like it a lot.
One of the things I like about it is, that it is not a symmetrical design.
The final object is of course symmetric, but the composition is much more interesting IMHO, BECAUSE of its non-symmetrical character.
This is kind of daring, and I congratulate you for having the courage to work like this
I see on this thread more pieces like this and enjoy them a lot.

Go for the abstract Lady, you do it well!

Keep up the good work, I enjoy it, gives me real pleasure.


Havi

[Havi]

To me,
It is not the mold that makes it so beautiful [even though the mold is quite nice and interesting, reminds me of Moje's molds]]

But the COMPOSITION!!!!




Havi

[twin vision glass]

Havi, coming from you that is special for sure. I remember our talks together many years ago in Portland , and have never forgot all the suggestions you gave me!!! I pray to meet you again at some point and share stories of our journeys in Glass as we both were so passionate in our discussions.
Leslie

[Havi]

You are always invited over here,! - - - -

And then, maybe elsewhere


Hugs,


Havi

[twin vision glass]

phpWyruXYAM.jpg (43.4 KiB) Viewed 23521 times

phpKTwYZWAM.jpg (43.36 KiB) Viewed 23521 times

phpc3Jd7RAM.jpg (30.84 KiB) Viewed 23521 times

Here is number 2 of 3 vessels that all go together. I am happy with the colours. I am also full of inspiration after spending a 60th birthday with my twin at Terminal City Co-op in Vancouver , B.C. where (I watched ) I was my twins assistant on the flame working torch while she made me beads for my birthday present. (all I did was cut up the gorgeous silver ) What an amazing trip it was and what a wonderful co-operative with wonderful artists who work tirelessly for the betterment of all other glass artists who are now members. How I wish I lived in Vancouver or Portland. I so missed getting all the way to Portland BUT next trip I hope. I flew as all roads where closed anyways, and could not have made it to Portland even if I wanted to .
Les (now off to fire number 3 of the vessels)

[Havi]

Beautiful, Les

Keep on this track - you come up with results I LOVE.

And congrats on your [in plural] birthday!
Many Many happy returns!


Havi

[Sue Hunchuk]

Wow! 60? No one would have guessed! Love your spirit! I do not have sisters, but can feel the love all the way through the computer! You are always such an inspiration! Keep it up!