Pot melt problem

[colettecoad]

I tried pot melting for the first time. I used a small terracotta pot and a recommended firing schedule. When it was done there was melted glass in the pot and a stream of glass connecting the bottom of the pot to the glass in the mold below. What caused this? I really need help. Thanks.

[Buttercup]

I'm definitely not qualified to give advice but check this out:

http://www.warmglass.com/phpBB/viewtopi ... =2&t=39790

Have fun Jen

[charlie]

not hot enough for long enough.

[Judd]

That's normal. You needed more heat and more time.

[colettecoad]

Thanks to all for the links and advice. I will try hotter and longer.

[Marty]

Got a peep hole? One quick glance will tell you whether it's done or not.