Atrium sculpture construction

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
Mark Hall
Posts: 59
Joined: Sun Mar 23, 2003 11:11 pm
Location: Kasota, MN
Contact:

Atrium sculpture construction

Post by Mark Hall »

Figuring out details on how to attach SS cable to various sizes of blown teardrop shapes - any thoughts on how to do this? Sure could use some ideas on how to make this look right, be strong, and clean.
Marty
Posts: 862
Joined: Mon Mar 10, 2003 3:58 pm
Location: Maine
Contact:

Re: Atrium sculpture construction

Post by Marty »

Need more details- size and weight of drops? any loops on them or will you drill or cradle them? how visible can the cables be? how professional does this have to be? who's installing it? public or private space?
Kevin Midgley
Posts: 773
Joined: Mon Mar 10, 2003 11:36 am
Location: Tofino, British Columbia, Canada

Re: Atrium sculpture construction

Post by Kevin Midgley »

You mean like this?
Copying is bad financial karma.
Rick Wilton
Posts: 273
Joined: Sat Oct 25, 2003 8:18 pm
Location: Calgary, Canada
Contact:

Re: Atrium sculpture construction

Post by Rick Wilton »

SERIOUSLY????

I'm quite sure others had done something similar ions before Robert Held has even BORN.
Rick Wilton
Mark Hall
Posts: 59
Joined: Sun Mar 23, 2003 11:11 pm
Location: Kasota, MN
Contact:

Re: Atrium sculpture construction

Post by Mark Hall »

The teardrop's end shape is determined by what's needed to hang it (yet undetermined). Weights vary as size changes. We'll be creating and installing the piece in a public setting, so it's definitely a professional job :). Perhaps the best starting point is to investigate the hardware associated with braided cables - any favorite suppliers?
Marty
Posts: 862
Joined: Mon Mar 10, 2003 3:58 pm
Location: Maine
Contact:

Re: Atrium sculpture construction

Post by Marty »

McMaster-Carr
Mark Hall
Posts: 59
Joined: Sun Mar 23, 2003 11:11 pm
Location: Kasota, MN
Contact:

Re: Atrium sculpture construction

Post by Mark Hall »

The connectors and fittings are pretty straight forward. How the cable connects to the glass is in question. Sure, we could drill holes - but wonder if wrapping the cable around the end may be the answer - but how would that be centered?
Marty
Posts: 862
Joined: Mon Mar 10, 2003 3:58 pm
Location: Maine
Contact:

Re: Atrium sculpture construction

Post by Marty »

Can't help without seeing what you're working with.
Tom Fuhrman
Posts: 187
Joined: Mon Mar 10, 2003 11:44 am
Location: eastern Tennessee
Contact:

Re: Atrium sculpture construction

Post by Tom Fuhrman »

Put a metal cap on the end of the teardrop and drill the glass so the metal can be pinned to the glass. then attach the SS cable to a metal loop on the metal part. "Double clamp all the connections to ensure a "safety net" should one fail.
Mark Hall
Posts: 59
Joined: Sun Mar 23, 2003 11:11 pm
Location: Kasota, MN
Contact:

Re: Atrium sculpture construction

Post by Mark Hall »

Thanks Tom - just one hole in the glass for a pin, or two?
Post Reply