Page 2 of 2

Re: Blowing OUT large Colour bar sections

Posted: Mon Nov 23, 2015 9:44 pm
by grammy
Absolutely beautiful. I am always fascinated by your work.

Re: Blowing OUT large Colour bar sections

Posted: Mon Nov 23, 2015 9:58 pm
by twin vision glass
:D You have made me smile so thank you!!! I am just feeling so blessed to still be able to create. Leslie

Re: Blowing OUT large Colour bar sections

Posted: Tue Nov 24, 2015 2:29 pm
by Rick Wilton
Gorgeous as always Les,

Let me know if I can be of help on this one. We are moved and more or less settled in.

Take care,

Re: Blowing OUT large Colour bar sections

Posted: Tue Nov 24, 2015 2:42 pm
by twin vision glass
Oh I sure will dear friend. !!! send me a note on email and let me know your address. I am coming into Calgary on the 5th of Dec. I do believe to pull some more Vitrograph Cane. So fun for sure. Made a lovely colour bar to go with the colours in the Vitrograph and look forward to sawing it all up. Tomorrow is an 8 hour day of sawing. IN MY plastic tent in my small studio. Ughghg! but necessary. :-k

Re: Blowing OUT large Colour bar sections

Posted: Thu Nov 26, 2015 3:38 pm
by twin vision glass
php3kISW0PM.jpg
phpEvPRoWPM.jpg
phprM4AhNPM.jpg
Can hardly wait to begin firing pieces from this colour bar. Am pulling another cane with the same colours in it and a vitrograph so it will be a lot of fun creating . Lots of slices to choose from .

Re: Blowing OUT large Colour bar sections

Posted: Sat Nov 28, 2015 3:20 pm
by twin vision glass
phpH0eKHYAM.jpg
phplKmWxxAM.jpg
phplHUzfmAM.jpg
The fun is beginning. Creating with the colour bars and vitrograph!!!!!

Re: Blowing OUT large Colour bar sections

Posted: Tue Dec 01, 2015 1:59 pm
by twin vision glass
phpVGMaMSAM.jpg
One hour till kiln is up to top temp. !!!!! Then the waiting game begins

Re: Blowing OUT large Colour bar sections

Posted: Thu Dec 03, 2015 4:35 pm
by twin vision glass
php7m5SVuAM.jpg
Flowed out nicely to edges and is now slumping. [-o< Hope it does not grab on one side but if so I will stop it quickly and re-slump in deeper mold mix 6 mold

Re: Blowing OUT large Colour bar sections

Posted: Sun Dec 06, 2015 1:24 pm
by twin vision glass
php08eFIzAM.jpg
phpJMadGiAM.jpg
NOW to polish the edge . It will look much more refined and lovely to be able to look into the edge and see interesting movement