How thick a layer of powder?

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
CH Glass
Posts: 15
Joined: Sun Mar 21, 2010 3:43 pm

How thick a layer of powder?

Post by CH Glass »

I used to know this... I want to fuse a 3mm layer of frit powder to a sheet of 3mm clear glass. How thick should the powder layer be, prior to firing? I'll fire to 1375 and hold for 15 minutes. In my kiln, that will give me a smooth shiny finish. Thanks!
Top
Post Reply

Return to “Techniques and Tools”