Where to find rose mold

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
Gabriel
Posts: 28
Joined: Sat Apr 19, 2003 4:36 pm
Location: Fort Wayne, IN

Where to find rose mold

Post by Gabriel »

Hello,

I am looking for a vendor that carries a rose mold. I saw one online a few weeks ago and can not find it again. It is a ceramic mold made up of five pieces. The overall dimensions are close to 4.5" x 2.5". Thanks for your help.


Gabriel
SherNE
Posts: 3
Joined: Mon Mar 10, 2003 6:34 pm
Location: Omaha, NE

Post by SherNE »

Hi,

Try Sundance in California http://www.artglass1.com
That's where I was looking at one.
It would be interesting to see some projects using them.
Sher
Chris H
Posts: 43
Joined: Sun Mar 09, 2003 5:58 pm
Location: Hilton Head Island, SC.
Contact:

Post by Chris H »

Gabriel
Posts: 28
Joined: Sat Apr 19, 2003 4:36 pm
Location: Fort Wayne, IN

Post by Gabriel »

I get the error message below when going to the link.

Artglass does seem to have a mold that sounds like what I saw, but there is no picture.

You do not appear to be the owner of this album.
Make sure you are logged in.
Chris H
Posts: 43
Joined: Sun Mar 09, 2003 5:58 pm
Location: Hilton Head Island, SC.
Contact:

Post by Chris H »

Chris H
Posts: 43
Joined: Sun Mar 09, 2003 5:58 pm
Location: Hilton Head Island, SC.
Contact:

Post by Chris H »

seems to work :) then click on newest and in the 2nd album :D
Post Reply